GT Hydraulic Bottle Jack

The GT Hydraulic Bottle Jack is a hydraulic jack for raising a load. Its large base plate helps it stand securely on a suitable surface, while the grooved saddle makes contact with the load. The jack must be positioned and rated for the intended lift.

It is for buyers selecting a hydraulic jack for a known load and lifting height. Check the jack's marked capacity, minimum height and available lift against the job; the GT specification sheet gives these measurements by model. The base also needs stable support and the saddle a suitable contact point.

Use it where the base plate has stable support and the grooved saddle can contact a suitable lifting point on the load. Check the surface and load at the actual point of use; a broad base does not make an unsuitable surface safe.

Do not use it if the load is heavier than the capacity marked on the jack, or if the base or saddle cannot make secure, suitable contact. Check those conditions before lifting rather than assuming a larger-looking jack is rated for the job.

The large base plate increases stability and the grooved saddle contacts the load. Each jack has a painted finish and is marked with its capacity, product ID and CE mark. A 2.1 certificate and Declaration of Conformity (DoC) are available if you need product documentation.

Check the load weight against the jack's marked capacity, then compare its minimum height, lifting height and adjusting height with the space and lift required. The GT specification sheet lists these dimensions by model; capacity alone does not tell you whether the jack fits the job.