Hydraulic Lifting Cylinder Accessories

Browse a range of Yale and Pfaff accessories for hydraulic lifting cylinders. Manifolds are used when different pressures must be maintained in each hydraulic line. Therefore, they allow the lifting of unequal loads. Manifolds are ready assembled and can be screwed directly to a hand pump or power pack. The model VSM-11 can be directly screwed into the oil port of a hydraulic cylinder and works at this location as a “hose break fuse“.

Showing 1 - 19 of 19 products

Yale GA Hydraulic Pressure Gauge Adapters

From £45.00 _{(inc VAT)}

£37.50 _{(ex VAT)}

Yale GGY Hydraulic Pressure Gauge

From £47.00 _{(inc VAT)}

£39.17 _{(ex VAT)}

Yale AYS Base Adapters for Hydraulic Cylinder

From £54.14 _{(inc VAT)}

£45.12 _{(ex VAT)}

Yale AYS Extension Tubes for Hydraulic Cylinder

From £56.78 _{(inc VAT)}

£47.32 _{(ex VAT)}

Yale Hydraulic Manifolds with 3/8 NPT inner Oil Ports

From £67.00 _{(inc VAT)}

£55.83 _{(ex VAT)}

Yale HHC Hydraulic Hoses

From £70.00 _{(inc VAT)}

£58.33 _{(ex VAT)}

Yale VHM Throttle Shut-off Valve

From £83.18 _{(inc VAT)}

£69.32 _{(ex VAT)}

Yale AYH Hydraulic Cylinder Clevis Eye Mountings

From £83.18 _{(inc VAT)}

£69.32 _{(ex VAT)}

Yale AYS Piston Plates for Hydraulic Cylinder

From £89.79 _{(inc VAT)}

£74.83 _{(ex VAT)}

Yale GYA Hydraulic Pressure Gauge Set

£110.91 _{(inc VAT)}

£92.43 _{(ex VAT)}

Yale AYS Lifting Claws for Hydraulic Cylinder

From £125.44 _{(inc VAT)}

£104.53 _{(ex VAT)}

Yale AYS Support Base Plates for Hydraulic Cylinder

From £140.00 _{(inc VAT)}

£116.67 _{(ex VAT)}

Yale VPR Pressure Relief Valve

£155.81 _{(inc VAT)}

£129.84 _{(ex VAT)}

Yale Hydraulic Manifolds with Shut-off Valves

From £245.60 _{(inc VAT)}

£204.67 _{(ex VAT)}

Yale VPS Pressure Switch

£279.92 _{(inc VAT)}

£233.27 _{(ex VAT)}

Yale VSM Hydraulic Safety Check Valve

From £304.81 _{(inc VAT)}

£254.01 _{(ex VAT)}

10 ton Pfaff HAW S Hydraulic Repair Set

£340.66 _{(inc VAT)}

£283.88 _{(ex VAT)}

Yale YCC-201 Hydraulic Chain Cutter

From £367.06 _{(inc VAT)}

£305.88 _{(ex VAT)}

Yale Hydraulic Manifolds with Shut-off Valves and Pressure Gauges

From £380.27 _{(inc VAT)}

£316.89 _{(ex VAT)}

More Information

The design of the VSM-21 is suitable for a combination with VHP directional valves. Pfaff hydraulic maintenance repair sets are indispensable in factories and workshops. They provide controlled hydraulic force for universal applications, such as pressing, straightening, lifting, flattening, pushing bolts, bending, spreading, tensioning, etc. Clevis eye mountings are screwed onto the piston and bottom of the hydraulic cylinder, in those cases where conditions require pivoting of the cylinder. Extension tubes are mounted onto the bottom of cylinders series YS by means of the base adaptor and two hexagon socket screws (screws are included with the base adaptor). The use of extension tubes adds to the versatility of the standard cylinders. In connection with the corresponding hydraulic cylinder, a lifting claw represents a compact, lightweight and versatile lifting unit. Piston plates reduce the surface pressure and prevent the pistons from sinking into the ground and support base plate prevent the cylinders from falling over and sinking into the ground. The use of Yale GGY pressure gauges is recommended when the operating pressure (the force of the connected cylinder) should be monitored. Yale pressure gauges are equipped with a stainless steel housing and an acrylic plastic face cover plate. Manifolds are used when several hydraulic cylinders have to be connected to one hydraulic pump.