500kg TPM Permanent Lifting Magnet


 Includes Shipping
 In Stock
 Typically dispatched within 3 working days*
 An Invoice will be emailed with your order
 Comes with Test Certificate

Choose an option!

TPM permanent lifting magnets are ideal tools for easy, quick and economical transport of heavy objects made from ferro-magnetic material. Typical operating areas are workshops and warehouses,loading and unloading of machines as well as construction of jigs and fixtures.

Factors that reduce the magnetic clamping force:

Air gap: High magnetic forces created by the TPM allow the magnet to clamp components through the air gap, however, air gaps will reduce the magnetic performance as they provide a barrier between the contact surfaces. Air gaps occur in a number of different ways such as paint, dust and heavy mill scale. Poorly machined surfaces also constitute an air gap. Please down rate the magnet capacity in accordance with the adhesive force/air gap diagram below.

Material thickness: If the TPM is used to lift plates thinner than the recommended minimum thickness, the clamping forces will be significantly reduced. Performance curves can be identified in conjunction with the adhesive force/flat thickness diagram below:

Contact area: Full lifting capacity can only be achieved when the magnet has full contact area with the component being lifted. If the contact surface has holes in or is uneven then the performance will be affected accordingly. Always carry out a trial lift in these circumstances to establish correct lifting before transporting the load.

Material type: Certain materials have different abilities to carry magnetism. For materials other than mild steel a reduction factor must be applied in order to calculate the effective clamping force.

Typical values:

Ferrous alloy steels 0.8

High carbon steels 0.7

Cast iron 0.55

Examples of reduced WLL:

Mild steel 500g

Cast iron 500kg x 0.55 = 275kgs

* Please see our Terms & Conditions page for more on shipping.
Origin:GB Flag Image United Kingdom
Max flat material capacity WLL:500kg
Min thickness to obtain max WLL:25mm
Max length of flat material:3000kg
Max round material capacity WLL:250kg
Round material diameter:200mm - 400mm
Max round material length:3000mm
Tear off force:1500mm
Dimensions:232 Length x 120mm Width x 270mm Height
Documentation:CE Marked and comes with Certification
Customer Reviews
lifting365 reviewlifting365 review